TOPCITY provides temperature profile test solutions for you

       Shenzhen TOPCITY Electronics Co., Ltd was since in 2003, specializing in the research and development of temperature curve tester, with independent intellectual property rights and registered trademarks, professional for the majority of users to provide furnace temperature curve mapping solutions, after years of exploration and practice, constantly sum up experience, improve products, create independent products The brand occupies a place in the field of furnace temperature curve surveying and mapping.

       Before 2006, except for a few foreign brands, almost all the furnace temperature curve testers recorded time is no more than an hour, sampling time is more than 0.1 seconds, after power failure does not save data, can not directly connect to USB interface, so can not meet some users with specific needs. In view of this situation, at the end of 2006, TOPCIT Y through technical transformation, TC series temperature tester is upgraded to the second generation product (classic model: TC-60KII), sampling time is set to 0.05 seconds - 600 seconds, the maximum recorded data reaches 1200 points / channel, can record 20 sets of temperature curves, data does not disappear after power failure, RS232 or USB can be used to directly connect to the computer, so that users can use it. It is more convenient to use, wider in scope of use and more efficient in testing. In 2007, TCK series furnace temperature tester was developed, up to 12 channels, optional wireless connection and wave soldering special test fixture. In 2008, we developed TCK2000, a furnace temperature tracker specializing in coating, silk printing, electroplating and food processing. TC series furnace temperature tester upgraded to the third generation in 2012, can save 256 sets of curves, data lines using the industry's first common USB line and RS serial data line compatible way, more convenient for users to use, while reducing user maintenance costs.

       The analysis and judgment of SMT reflow welding furnace temperature curve is ambiguous or half-solution in many SMT factories. How to judge the temperature curve quickly and accurately is the function of furnace temperature tester software. Most furnace temperature testers in the industry are deficient in this respect. KIC furnace temperature tester in this respect. Well done, but KIC furnace temperature tester is expensive, TOPCITY in the TC series furnace temperature tester second generation products and TCK series furnace temperature tester have been achieved process indicators, there are a large number of SMT factories, SMT equipment factories and solder paste manufacturers using our company's furnace temperature tester, such as Foxconn Enterprise Group - - SMT lead-free return. Flow welding is usually the highest temperature around 260 C, the longest time will not exceed 10 minutes, but the radiator welding is exceptional, usually set temperature above 300 C (except for low temperature solder paste), time up to 20 minutes, or even longer, many temperature curve test products can not meet the requirements, TOPCITY furnace temperature tester Adopting double thermal insulation protection, we have successively provided temperature curve testers for a number of radiator manufacturers, such as Foxconn, Xinqiang Electronics, Yongjiang Hardware, Jingneng Industry, Jinfeng Electronics, Youju Electronics, to solve the problem of temperature curve mapping. Temperature curve testing of DIP wave soldering is usually neglected. Many DIP factories do not carry out furnace temperature curve testing for wave soldering all the year round, and only use a thermometer to test the temperature of tin furnace, regardless of the actual temperature of the preheating zone reaching PCB, so that the flux can not be effectively activated, resulting in poor welding effect. In fact, the temperature curve test of wave soldering furnace is more technical in the process of temperature curve test because of its fast transportation speed and short time. It has higher requirements for the sampling time of thermometer, the sensitivity of temperature line and the fixing of temperature point. TOPCITY technicians constantly sum up their experience in technical exchange with customers and form their own unique characteristics. The test technology of wave soldering temperature curve. TOPCITY successfully developed the temperature measurement system of TCK-W-1 wave soldering furnace in 2007. In addition to the traditional temperature curve testing function, TOPCITY also has the analysis of wave crest information, such as wave crest level, tin dipping depth, tin dipping time, tin dipping width and transport speed, which is more perfect than imported products. Temperature tester is connected in the furnace body by RF and computer to monitor the temperature in the furnace in real time. Most of the temperature testers do not have this function. Even if they have wireless transmission function, it is difficult to overcome the shielding and information interference of the furnace body and can not achieve real wireless monitoring. In 2008 TOPCITY in TCK system. Based on the original wireless transmission system of the temperature tester, the technical upgrade is carried out to realize the real wireless monitoring function of the furnace temperature tester, which reaches the advanced level of similar products at home and abroad. Tunnel furnace temperature tracker used in coating, electroplating, food processing, glue solidification and other industries requires high temperature, long duration, ordinary reflow soldering furnace temperature tester can not meet such requirements, the industry only a few brands to provide such products and technology, TOPCITY is one of them. The specialization of products and technology is the trend of the development of industry technology. At the end of 2008, TOPCITY successfully launched TCK2000 series tunnel furnace temperature tracker, professional hardware and software design, providing more effective temperature curve mapping and analysis for tunnel furnace and oven temperature tracking. Because of the particularity of the production equipment, there is no special temperature curve tester and related fixture for this kind of process before 2008. TOPCITY is tailor-made to customers according to the characteristics of the production equipment to solve the furnace temperature curve mapping for the vacuum coating plant, and in 2008 for this one. The industry has designed the only dedicated furnace temperature tracker TCK1204&TCK2003.

      "Innovation, sincere service" is TOPCITY's corporate purpose, to provide customers with appropriate products is our responsibility, we will continue to provide more customers with quality products and services!

Previous：W-1-TCK

Next：This is the last one.